SCHOOLS & B2B Need an official quote or tax-exempt PO for your facility?

Gym Wall Padding: How to Measure, Spec and Order Wall Pads for a School or Rec Gym

Gym wall padding covers the walls around a playing area so players have a padded surface behind baselines, along sidewalls, and at corners or columns. Pads are sized to your walls. Send wall measurements and photos when you request a quote.

This guide is for facility buyers — athletic directors, facilities staff, churches, YMCAs, recreation centers, and contractors — who need wall padding. For pole and backboard pads, see our basketball pole and backboard padding buying guide.

Where gyms usually pad

Buyers typically pad:

  • End walls behind the baselines
  • Sidewalls near the court
  • Exposed corners
  • Structural columns in or beside the playing area
  • Other impact areas the facility or architect names (for example, a stage front)

Exact coverage is your project's call. Use the measurements below so a quote matches the walls you intend to cover.

How to measure (checklist)

We do not currently publish a separate measuring sheet. Use this checklist when you gather information for a quote:

For each wall run

  • Overall wall length (or each segment between doors, corners, or columns)
  • Desired pad height (common stock heights are 5', 6', and 7'; custom heights are available)
  • How far off the floor the bottom of the pad will sit (many installations start about 24" up; follow your facility or architect if they specify otherwise)
  • Photos of the full wall and close-ups of outlets, switches, alarms, doors, and columns

Obstructions and special pieces

  • Note every outlet and switch location on the wall (height and distance from a corner or edge). Those openings are cut on site after the pads arrive, using the FT449 field cutout insert — mark them clearly so your installer knows where each cutout goes
  • List every fire alarm, thermostat, window, or door in the pad area
  • Corner count (outside corners you want wrapped)
  • Column count, shape (round or multi-sided), and dimensions

Project notes

  • Colors or school/facility artwork you want on the cover
  • Indoor or outdoor location (confirm suitability for outdoor use before ordering outdoor pads)
  • Desired delivery window and receiving contact / phone for freight

Send the completed checklist with photos when you request a quote.

Cutouts for outlets, alarms and doors

Outlet and switch cutouts are made by the buyer on site, not at the factory. After the wall pads are mounted, the installer drills through the wood back, cuts the opening to size, cuts out the foam, makes an X in the vinyl, pushes the FT449 field cutout insert through the vinyl, then staples the excess vinyl to the back of the wood. Confirm the FT449 fits your BodyGuard configuration before ordering, and order one insert for each opening you marked on the measuring checklist.

Corners and columns

  • Corner padding — for wrapping an exposed wall corner. Order it when you need the pad to turn the corner, not as a substitute for a flat wall panel.
  • 3-sided column padding — custom-order padding for structural columns; send column dimensions with the quote.
  • Round column padding — custom-order pad designed to wrap round columns (product details list 1" foam and a Velcro closure on the round column pad). Send diameter/height with the quote.

Options: foam, cover, colors and logos

What we sell. We quote and sell First Team wall padding. We prioritize First Team; other brands are not the default path.

Primary product. First Team BodyGuard Protective Wall Padding is designed for gyms, schools, recreation centers, and athletic facilities that need padded wall surfaces around the playing area. Configurations and colors vary — confirm pad size, backing, color, quantity, and installation details before ordering.

Foam. BodyGuard wall pads use 2" foam, which is the industry standard configuration we sell for these pads. We do not publish a separate thickness ladder by facility type without more documentation.

Heights. Standard heights include 5', 6', and 7'. Custom heights are available. Panel widths are confirmed on the quote.

Cover (vinyl). The cover is 14 oz vinyl. It is not fire rated, and First Team does not offer a fire-rated vinyl option. If your project requires a fire-rated wall covering, check with your facility staff or fire marshal before you order — do not treat these pads as meeting a fire or building-code rating.

Colors, logos and lettering. Custom colors and artwork are available. Lettering/artwork typically adds about 7–10 days. White, blue, red, and black are often in stock to some degree; other colors follow stock or production timing.

Mounting and who installs

Each pad has a 1" lip along the top and bottom for nailing or lag screws. Mounting hardware is included.

Installation is by the buyer (school maintenance, facilities crew, or your contractor). Quality Hoops supplies the pads; we do not install them as part of a standard order. Follow the manufacturer's instructions and have a qualified person assess the wall.

Lead time, freight and school paperwork

  • In-stock pads can ship in about 48 hours.
  • Otherwise, expect about 7–10 days before ship (custom colors/artwork often fall in this range).
  • Pads ship by freight; provide a receiving contact and phone so the carrier can schedule delivery.
  • Schools and tax-exempt buyers: most school projects start with a quote, then a purchase order. If you need specifications, submittal sheets, a W-9, or tax-exempt paperwork, say so when you request the quote — same path as on our basketball goals for schools page.

Browse all padding, or see commercial basketball goals and basketball goals for churches when wall pads are part of a larger facility package.

FAQ

How do I measure my gym walls for padding?

Measure each wall run's length, the pad height you want, and how far off the floor the bottom edge will sit. Note every outlet and switch location for on-site FT449 cutouts. Photograph obstructions. Use the checklist above and send it with your quote request.

How high should gym wall padding go, and how far off the floor?

Standard heights include 5', 6', and 7'; custom heights are available. How far off the floor is the customer's (or architect's) choice — many installations start about 24" up.

What thickness should a school gym use?

The BodyGuard wall pads we sell use 2" foam. Tell us the facility type and any written spec you must meet so we can confirm the configuration on the quote.

Do I need a fire-rated cover?

These pads use 14 oz vinyl that is not fire rated, and First Team has no fire-rated vinyl option. If you need a fire-rated wall covering, check with your facility or fire marshal before ordering.

How do you handle outlets, fire alarms and doors?

Mark every outlet and switch on your measuring checklist. Cutouts are made on site: cut the wood back and foam, X the vinyl, install the FT449 field cutout insert, and staple the vinyl to the back. Confirm FT449 quantity and fit at quote time.

How are wall pads mounted, and can maintenance staff install them?

Pads have a 1" lip top and bottom for nailing or lag screws; hardware is included. Buyers install with their own crew or contractor.

Can we get school colors and a logo?

Yes — custom colors and artwork are available. Artwork usually adds about 7–10 days.

How long does it take, and how does it ship?

In-stock colors can ship in about 48 hours; other orders about 7–10 days. Freight delivery needs a phone contact on site.

Can schools buy with a PO / tax-exempt?

Yes. Request a quote and tell us if you need a W-9 or tax-exempt paperwork with the PO packet.

Request a quote

Request a gym wall padding quote with your checklist, photos, and color/artwork notes — or call (405) 339-0055.


Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.